japanesefree高清日本乱,最近中文字幕2018国语免费,无套白浆农妇大屁股,亚洲av日韩av高潮喷潮无码

鋸末顆粒機在進料的過程中，由于植物下角料，企業生產廢料，生活垃圾，建筑垃圾，農作物秸稈以及皮殼等的形狀都是不規則的，不僅容易弄臟設備，還很容易造成設備的堵塞或憋機現象，那么造成設備憋機的原因有哪些呢？

In the feeding process of sawdust granulator, the shape of plant leftovers, enterprise production waste, domestic waste, construction waste, crop straw and husk is irregular, which not only easily pollutes the equipment, but also easily causes the equipment to block or block. So what are the reasons for the equipment holding up?

1、進料過猛，導致顆粒機擠壓室內料層過厚。

1. The material layer in the extrusion chamber of the granulator is too thick due to the excessive feeding.

2、有螺絲、石塊等硬物進入制粒室，造成硬物卡在壓棍和磨具之間。

2. There are screws, stones and other hard objects into the granulating chamber, causing the hard objects to be stuck between the pressure bar and the grinding tool.

3、電壓不穩定，降低后沒有及時的調節進料速度，因為電壓降低后，電機必然會通過電流的增加來補償電壓低，這樣就造成電機的輸出功率降低，同樣的電機的扭矩力相應的降低。而沒有及時的調節進料速度必然造成憋機現象的發生。

3. The voltage is unstable and the feeding speed is not adjusted in time after the voltage is reduced, because the motor will inevitably compensate for the low voltage through the increase of current after the voltage is reduced, which will cause the output power of the motor to be reduced, and the torque force of the same motor will be reduced accordingly. However, if the feeding speed is not adjusted in time, it will inevitably lead to the phenomenon of holding up the machine.

鋸末顆粒機出現憋機的現象，就會導致設備無法繼續正常工作，給我們的正常生產帶來不便，隨意我們一定要及時發現并解決憋機的問題，從而提高工作效率。

The phenomenon of holding up the machine of sawdust granulator will lead to the equipment can not continue to work normally and bring inconvenience to our normal production. We must find and solve the problem of holding machine in time at will, so as to improve the work efficiency.